Word: wax
(lookup in dictionary)
(lookup stats)
Dates: during 1930-1939
Sort By: most recent first
(reverse)
...sheet copper. Sore at heart that I am so empty-headed on nature. Watch the workmen attach the needles and leaves to a wire, first twisting each into boughs. Many single wires are twisted for the bare branches of other trees. Hardwood trees. One man making figures of wax for the big model; leaves them naked. Musculature must be correct before they can be clothed. To a corner to examine the unfinished model. Its plastic terrain has been completed and part of the surface painted. Trees have been soldered and painted according to colored sketches. The background is in place...
Several hours later found us squated around our open camp fire, inspecting our equipment for the following day. We scraped off the old wax down to the wood with a homemade scraper and applied out native Klister, which is a mixture of pine pitch and oil. We then heated the skis over the fire (as wax will not stick to wet wood) and with a wax mitten rubbed them to a high glassy finish, making them waterproof. The patience and tireless efforts of these Lapplanders has convinced me that waxing is almost as important as actual skill, as by proper...
...instruct all my service men, that skis should be cleaned down to the bare wood, which must be absolutely dry. Then after several applications of oil have been absorbed. Klister should be burned in with a blow torch. This completes the base and the ski is ready for the wax...
...Wax varies in hardness and is classified as hard, medium and soft. The hardest waxes are for gliding or increasing speed down hill. The soft waxes are for climbing, and medium waxes are used for both up and down hill. There are some exceptions to the above, as Lard wax will soften as the temperature rises. The climbing properties of waxes are increased if the wax is applied thickly, the most satisfactory method being to build it up in layers. However, many skillful skiers know nothing of the intricasics of ski wax...
...suggestion is to go to any reliable dealer and get about three grades of wax, and become familiar with the use of it. I will be glad to help solve personally your ski problems...